Dustbin aka a waste box or bin is a container for garbage.Most made of metal or plastic, when put into plastic bags, when the garbage can tie up the bag to throw away.Trashcans are people's life & quot; dirt & quot; containers. Most trash cans are covered to prevent the odor of garbage scattered. Some garbage cans can be opened with feet.
Teencher Inspection team consists of professional quality control and international trade experts, each memberwith extensive inspection experience and very strong sense of service. our inspection can help you to reduce logistics costs, return risk, complaints, compensation and potential brand reputation due to quality problems.
1.Inspection Environment and Requirement
-Requirement for place of inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.2.Visual NonConformities Standard
Visual nonconformities as stated below are typical defects during production and must be handled either by means of suitable measuring or comparison practices. A practical method is to compare defects either against the specification guide or against provided samples.
-Not permitted any sharp point/sharp edge,burr,flash mark,crack etc.
-Not permitted infestation of live insect.
-Not permitted heavily odor.
-Not permitted rust,pell off coating etc.
-Not permitted missing printing,poor printing etc.
-Not permitted materail fraying.
-Not permitted torn/damaged surface.
-Not permitted crease mark,burn mark,water spot,color stain,oil stain,dirty mark etc.
3.Field Test & Measurement
-Color shade check
-Function check
-Smell check
-Product dimension check
-Product weight check
-Barcode readable check
-Loading test
-Capacity check
-Leaking test
-Product performance check
-Rub test
-Tape test
-Quantity per carton check
-Carton dimension check
-Carton gross weight check
-Carton drop test