Scissors are a double-edged tool for cutting cloth, paper, steel plates, rope, sheet or circular steel, etc. The two blades are staggered and can be open and closed.
Teencher Inspection team consists of professional quality control and international trade experts, each member with extensive inspection experience and very strong sense of service. our inspection can help you to reduce logistics costs, return risk, complaints, compensation and potential brand reputation due to quality problems.
1.Inspection Environment and Requirement
-Requirement for place of inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.2.Visual NonConformities Standard
Visual nonconformities as stated below are typical defects during production and must be handled either by means of suitable measuring or comparison practices. A practical method is to compare defects either against the specification guide or against provided samples.
-Not permitted any sharp point/sharp edge.
-Not permitted infestation of live insect.
-Not permitted blood mark
-Not permitted heavily odor.
-Not permitted chipped mark,burr, dent mark,scratch mark etc.
-Not permitted rust mark.
-Not permitted wrong printing,missing printing,poor printing etc.
-Not permitted hole, peel off wood,unreasonable gap.
-Not permitted mold mark,flash mark,shrink mark,white mark etc.
-Not permitted water spot,color stain,oil stain,dirty, impurity mark etc.
3.Field Test & Measurement
-Color shade check
-Smell check
-Function check
-Product dimension check
-Product weight check
-Barcode readability check
-Product performace check
-Hardness comment check
-Moisture check
-Rub test
-Tape test
-Quantity per carton check
-Carton dimension check
-Carton gross weight check
-Carton drop test